Accueil » Nos luges » Lugicap Ice Perf
LUGICAP ICE PERF (formerly known as LUGIGLACE) is the ultimate version of our ice sleds.
Designed for demanding skaters who wish to progress in the discipline of wheelchair ice skating.
LUGICAP ICE PERF offers fine tuning to perfectly secure your wheelchair to the Sled. Glide quality and cornering behavior pave the way for pure performance. Welcome to the world of high performance and thrills you've always dreamed of.
The Luginaute/guide pairing becomes a team... where speed and performance are the order of the day.
Lugicap Ice PERF
Prices, please contact us
Standard
User manual
The LUGICAP ICE PERF is a Sled designed for people with reduced mobility who want to go a little further than just skating on the rink. skating rink.
The LUGICAP ICE PERF is dedicated to high-performance ice skating on ice rinks or frozen lakes and rivers. This specialization means it can be perfectly adjusted in width to fit the wheelchair it is designed to accommodate. The LUGICAP ICE PERF is more compact and less bulky than the LUGICAP ICE model.
The type of wheelchair suitable for this activity is a 4-wheel wheelchair. All wheelchairs must be CE marked.
The LUGICAP ICE PERF+ is a sled with a larger frame — 100 mm bigger. It can accommodate wider wheelchairs.
LUGICAP ICE PERF is easily adjustable to accommodate any type of 4-wheel manual wheelchair.
The adjustments offered by LUGICAP ICE PERF allow optimum adjustment of the Sled to the on-board wheelchair.
The wheelchair is immobilized on the Sled with sturdy, easy-to-handle securing straps. A safety harness and lifeline are automatically supplied.
The LUGICAP ICE PERF can be ordered with or without a carrying case.
NB: LUGICAP ICE is delivered assembled, ready for adjustment.
LUGICAP ICE PERF sleds have the following components and dimensions:
** Outside distance of rear wheels at ground level *** Inside distance from rear wheels to ground level
LUGICAP ICE PERF+ sleds have the following components and dimensions:
Lugicap equipment comes with a two-year warranty against manufacturing defects. In the unfortunate event of a manufacturing defect, we will replace the defective part and ship it to you.
Certain equipment is systematically included when you order Sled LUGICAP ICE PERF.
They are necessary for sliding on the surface.
The Harness keeps the user in the wheelchair, preventing any risk of tipping over.
It links the attendant and the boat. This is essential to maintain contact between the two, even if the attendant lets go of the wheelchair.
This lifeline must not be removed until the activity is completely finished.
It is used to perfectly adjust the wheelchair to the LUGICAP ICE PERF.
Standard
The Sled is width-adjustable to fit most 4-wheel manual wheelchairs.
1. Measure the wheelchair's track width using our setting calipers or another measuring device:
2. Loosen the 2 handles* C located on the top of the equipment.
*Thehandles are 'indexed': by lifting the handle, it can be repositioned without affecting tightening or loosening.
3. Enter the track width measured on the equipment chassis (dimension X).
4. Vary the width of the frame to reach dimension X.
5. Mark X at 2 points on the chassis to adjust alignment.6. Tighten the handles as much as possible (manually).
7. Optimum width adjustment is achieved when the outer flanks of the wheelchair wheels are positioned against the inner flanks of the frame, with no play (as shown in the photo opposite).
Wheel stops must be adjusted to the diameter of the wheelchair's wheels. They must hold the wheel in its housing without any degree of freedom.
1. Loosen the knobs A on the underside of the frame to release the stops.2. Adjust the stops B according to the diameter of your wheelchair's wheels so that the wheels are immobilized (without degrees of freedom), then tighten A manually to the maximum.
1. The attendant presents the wheelchair with its back to the front of the equipment in preparation for docking.
2. The attendant tips the wheelchair onto its rear wheels and boards the equipment.
3. The wheelchair fits between the adjustable wheel stops.
Depending on experience and comfort, we recommend that you board your wheelchair with the help of 2 attendants (one at the back of the wheelchair, the other at the front), to ensure safe boarding.
To secure the wheelchair to the equipment, the Sled is fitted with a clamping strap (in red).
1. Install the bridle strap
Fig. 1.1
Fig. 1.2
2. Check that the strap is tight, and that the wheelchair is now firmly secured to the equipment.
When working, check regularly that the bridle strap is always taut.
It's important to be well supported in the wheelchair, so you can enjoy the experience 100%, in a safe environment. We strongly recommend the use of a safety harness. The one we offer is easy to use, adjustable and safe.
1. Secure the boat.2. Remove the clamping strap.3. The attendant lifts the wheelchair by its handles to disengage it from the stops.
4. The attendant tips the wheelchair onto its rear wheels and disembarks.
A user manual is systematically supplied with all LUGICAP equipment.
Standard
